BlitzzCam / Use cases / Security and Low Voltage

✦ Security and low voltage

The photo app for security integrators.

Photos of every device and cable run.

Above ceiling work disappears fast. BlitzzCam stamps every photo with GPS and time so your as builts, closeout and service history are always on hand.

Try BlitzzCam free Book a demo

CommissioningPDF

Bay Point Logistics · 48 cameras, 12 doors

Cable runsLabeled both ends

Head endRack dressed

Camera viewsApproved by owner

Door 7Strike not releasing

Owner link sharedCopy

9:415G

Bay Point Logistics securityCommissioning checklist

5 of 7 done

Cable labelsBoth ends, all runs6

Rack and head endDressed and labeled3

Camera field of viewDock cameras adjusted12

Access control panelWiring photographed2

Door 7 strikeNot releasing1

NVR settingsRetention set1

Owner trainingNot started

JobsContacts+ChecklistsMenu

AI WalkthroughNotes from the walk

✦

Closeout readyPhotos and checklists

The problem

As builts are always behind

A camera goes down and the service tech has no idea where the cable runs. The install photos left with the crew.

Phone camera and group texts

Above ceiling runs with no photos
Device locations missing from as builts
Commissioning on paper
Service techs starting from scratch
Closeout packages built by hand

BlitzzCam for security and low voltage

Every photo saved to the right job
GPS and time on every shot
Commissioning checklists with photos
Closeout reports in clicks
A service history for every site

How it works

Snap. Organize. Share.

Snap

Take photos and videos on site. Talk if you want AI to take notes.

Organize

Every shot lands in the right job with GPS, time and tags.

Send the owner a live link or a PDF report.

What integrators capture

Document every device

Site surveys

Walls, ceilings and mounting points.

Cable runs

Above ceiling and in wall before close up.

Labels

Cable and device labels at both ends.

Device locations

Cameras, readers, sensors and panels.

Head end

Racks, panels and power supplies.

Commissioning

Checklists for every device and door.

Service calls

What you found and what you fixed.

Closeout

As builts and photos for the owner.

BlitzzCam AI

Less typing. Better records.

Talk while you work. AI handles the notes, tags and closeout reports.

AI Walkthrough

Talk through the walk. AI turns it into notes on the job.

AI IS LISTENING"Door seven strike is not releasing. Panel wiring looks good. Need a new strike."

Auto tags

Photos get tagged by device, area and stage as they come in.

AI reports

Pick a job and get a commissioning or closeout report.

Who it's for

Built for the field and the office

Techs capture it. PMs, service and owners see it the same day.

For the field

Built for techs

Snap it before the ceiling tile goes back.

Photos and videos on iOS and Android
GPS and time on every shot
Commissioning checklists
Talk instead of typing notes

For the office

Built for PMs and service

Close out faster and service smarter.

A timeline for each site
Search by device and area
Closeout reports in a few clicks
Links for owners and GCs

FAQ

Frequently asked questions

Can I use it for commissioning?

Yes. Build a commissioning checklist once. Techs add photos and notes to each device.

Will service techs see the install photos?

Yes. Every photo stays on the site, so the next tech sees where everything runs.

Can I share closeout with the owner?

Yes. Send a link or a PDF report. No app or login needed.

How does BlitzzCam use AI?

Talk while you take photos and AI Walkthrough turns it into notes on the job. AI can also tag photos, help you search them and write reports and daily logs.

How much does BlitzzCam cost?

Start with a free 14 day trial. Monthly plans are $49.99 per month with 3 users included, plus $14.99 per month for each additional user. Annual plans save 20%: $39.99 per month with 3 users included, plus $11.99 per month for each additional user, billed annually.

Close out faster.

Get your techs shooting in minutes. Free for 14 days.